Installation UVR-450/16 is base model, general purpose industrial version by PC Globecore production Overall dimensions -length - 4000 mm -width - 1500 mm -height - 2000 mm UVR-450/16 is intended forpurification, clarification, removal of aromatics of dark heating oil and dark diesel oil, gas-condensate, also for regeneration of transformer oil, turbine oil, industrial oil and other lightmineral oils. For different products this installation gives a different productive capacity. For transformer oil: capacity is 300 LPH For dark heating oil: capacity is 600-700 l/h For gas-condensate( you better should utilize another model explosion proof version): capacity is 1000 kg/h Fuel, oil cleaning unit UVR 450/16 is fully automatic, you can also select manual mode. The equipment is incompliance with all relevant international standards. All accessories are from manufacturers such as «Festo», "Camozzi", "IVR", "Carlo Gavazzi" (Italy), "Bell Flow Systems", "Influx" (UK), "RVTProcess Equipment GmbH" (Germany) and others. Results of reclamation of dark heating oil are perfect. Dark heating oil passes through the unit only once. There is no double run, and no aluminumsilicate. Our sorbent can reclaim bed heating oil to the "like new" condition, remove aromatics, remove unsaturated hydrocarbons, remove hydrogen sulfide and others additions. After regeneration oftransformer oil on Fuel, oil cleaning UVR 450/16 unit we obtain oil superior to new oil. Parameters of regenerated oil such as acid number, tangent delta are better compared to new oil. To get moreinformation about installation UVR 450/16 you can visit our website
Installation is designed for cleaning and refining of dark heating oil and dark diesel fuel also can be use for regeneration of light mineral oils, transformer oil, turbine oil, industrial oil,hydraulic oil, insulation oil. Productivity of this installation is 100 l/h. Productivity of installation can be always increased in 2-3 times, you only need to buy supplementary blocks which areproduced at our plant. Installation UVR is universal and can be use for all types of reclamation, regeneration, cleaning of oils and fuels without any reconfiguration. All units of a complex onproduction of the fuel cleaning system UVR are made from stainless steel in following executions: general purpose industrial, containerized and explosion-proof version. We also can offer you to makea reclaiming test of yours example of oil to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Maintaining your fuel in apristine condition will also benefit your machine life by reducing wear of the components. All machines are manufactured by us in the Ukraine using the highest quality European components. Fuel, oilcleaning system UVR 450/6 (in different execution): • Clean diesel fuel and light mineral oils such as industrial oil, transformer oil, turbine oil, and also gas-condensate, kerosene etc. • Removeacids, sulfur, mercaptan, aromatic, different additions • Remove all types of water (free, emulsified & homogenised) • Can be operated by only one operator • Fully portable • Saves on Fuel Costs• Environmentally friendly Reclaimed oil might be BETTER then what you are using now You don`t need to spend your money for buy a new oil. All you need is only carry out regeneration (reclamation) ofyours used oil. You don`t need spend your money for utilization spent sorbent it can be reactivated in the same unit. Each of these factors will help to reduce your operating cost. To get moreinformation about installation UVR you can visit our website
UVR 450/16 (containerized) is designed for complete oil purification. By using these units you can regenerate all types of mineral oil such as transformer oil, industrial oil, turbine oil, insulatingoil, dark heating oil, light mineral oils, diesel fuel and diesel oil, gas condensate and others. UVR 450/16 (C) is universal and can be use for all types of reclamation, regeneration, cleaning,refinery and recycling of oils and fuels without any reconfiguration. Overall dimensions of this unit are: -length - 4000 mm -width - 1500 mm -height - 2000 mm The equipment is in compliance with allrelevant international standards. All accessories are from manufacturers such as «Festo», "Camozzi", "IVR", "Carlo Gavazzi" (Italy), "Bell Flow Systems", "Influx" (UK), "RVT Process Equipment GmbH"(Germany) and others. This environmentally application allows: • Clean diesel fuel and light mineral oils such as industrial oil, transformer oil, turbine oil, and also gas-condensate, kerosene etc.• Remove acids, sulfur, mercaptan, aromatic, different additions • Remove all types of water (free, emulsified, homogenised) All units of UVR type can be operated by only one operator Fullyportability is one of the particularities of that equipment. Unit performance: • refining of diesel oil - 600-700 L/h • cleaning of gas-condensate - 1000 kg/h • purification of gasoline - 1000 kg/hProductivity of the unit can be always increased in 2-3 times, you only need to buy supplementary blocks which are produced at our plant. Pursuant to our technology, oil passes through the unit onlyonce. There is no double run, and any aluminum silicate. Our sorbent can be used during 2-3 years. According to this, you can reduce your operating costs. We can reclaim bad oils to the "brand new"condition and remove aromatics, unsaturated hydrocarbons, hydrogen sulfide and other additives. After regeneration of oil by «Fuel, oil cleaning UVR 450/16 unit» we obtain higher quality oil than newoil. Acid number, tangent delta in regenerated oil has better parameters compared to the new oil. We also can offer you to make a reclaiming test of yours example of fuel (oil) to check thepossibility of cleaning it. If the oil is contaminated and not suitable for using than filtration can be recommended. We break the myth that recycled, reclaimed transformer oil (or industrial oil,turbine oil, mineral oil, diesel fuel and other types of mineral oil) is BAD oils, and it actually shows that reclaimed oil can be BETTER then what you are using now!
Diesel fuel cleaning system UVR 450/16 is designed by engineers from PC GlobeCore. Technologies which we use allow cleaning old used oil to the "brand new" condition. We offer you completelyenvironmental solution for oil/fuel processing - vacuum oil regeneration. Our fuel, oil cleaning units remove contaminates, such as acids, mercaptan, sulfur, aromatics and other impurities fromdiesel fuel and all light mineral oils such as transformer oil, industrial oil, turbine oil. Fuel, oil cleaning system UVR 450/16 (in different execution): • Clean diesel fuel and light mineral oilssuch as industrial oil, transformer oil, turbine oil, and also gas-condensate, kerosene etc. • Remove acids, sulfur, mercaptan, aromatic, different additions • Remove all types of water (free,emulsified & homogenised) • Can be operated by only one operator • Fully portable • Saves on Fuel Costs • Environmentally friendly RECLAIMED OIL might be BETTER then what you are using now. Atthe picture you can see one of examples of regenerated diesel fuel by using UVR system of PC GlobeCore production. At the left side you can notice the old used diesel fuel. This example of fuelcontents different impurities, has a bad aromatic, has a dark color. On the right side you can see regenerated fuel. The color of oil is much more lighter than at the first. Furthermore, regeneratedfuel has no contaminants, this fuel is corresponded with all standards of quality. The price of regenerated fuel is lower than new fuel. You dont need to spend your money for buying new oil, you justneed to regenerate your old one. The profit is obvious. To become familiar with results of used oil regeneration you can visit our website
Liquid/Fuel Blending Systems USB are designed to blend up to five separate liquid components at rates ranging from 18 m³ to 200 m³ per hour, particularly low-octane gasoline with high-oxygeneadditives, to prepare multicomponent motor fuel blends. These can include biodiesel blends, bioethanol and other fuels blends. Modern hydrodynamic stream fuel blending plants have proven themselvesto be an economic, accurate and steady solution for high-quality motor fuel blend production with optimal prime cost. In comparison with existing technology of fuel blending in blending vessels, theeconomy and increase of production profit margin can result in return on investment of 60 % a year. USB Blending systems are intended for: - fuel saving; - octane number increasing; - cetane numberimprovement; - blended fuels production; - blended bio-gasoline (straight-run + bioethanol) production; - production of winter diesel fuel and arctic gasolines (decreasing of a haze point and pointof congelation); - activation of heavy fuel (black) oil (processing and averaging of watered heavy fuel oil); - low-viscous ship fuel improvement; - production of watered heavy fuel oil emulsions; -production of furnace oil; - crude oil and oily mixtures processing; - petroslimes processing; The Unit can be applied on: oil tank farms, petroleum refineries, mini-refineries, refuel stations,ships, by bunkering companies, experimental departments and labs of different factories and institutes. More info on our website
The advantage of the Magnetic Vortex Activator (AVS-100) among other competitors are: acceleration of both physical and chemical processes; the obtaining of quality improvement for products; adecrease in raw materials consumption with a concomitant increase in product yield; a decrease in energy consumption; and, a decrease in space requirements. AVS-100 or the Magnetic Vortex Activatoris, in fact, an Intensifier of Technological Processes such as dispersion, homogenization, mixing, milling, etc. This device can be used as reactor. By using this device you can remove heavy metalsions (Fe++, +++, Ni++, Zn++, Cu+,++, and Cd++) from wastewater, as well as chromium- containing compounds (hexavalent and trivalent chromium), metal hydroxide formation, cyanides and cyanates etc.,where the regular methods of treatment are ineffective or failing. Possible processes which can be running in the Magnetic Vortex Activator AVS-100: • Wastewater purification (wastewater treatment) •Mixing of liquids and gases • Mixing of free-flowing materials • Dry crushing of solids • Liquid dispersing medium crushing of solids • Activation of solids particle surface • Embodiment of chemicalreaction • Modification of the physical and chemical properties of substance • Used oil recycling • Creation of stable water-fuel emulsions, water-oil emulsions, diesel oil emulsions, coal-wateremulsions • Generation and modification of heating oil, boiler fuel, and process fuel • Treatment of low-quality, water-cut reduced fuel oil • Purification of diesel fuel by removing paraffin andsulfur • Processing and treatment of service and industrial wastewater • Recycling of distillery dregs • Regeneration of lubricants and coolants • Purification of oil contaminated soil, etc. Thislist is still incomplete. A differential peculiarity of the Magnetic Vortex Activator is a high relative productivity. In other words, at the smallest expenses of energy and resources, we obtain anoptimum result. Installation of the AVS-100 unit enables one to provide a treatment quality below the maximum permissible concentration, reduces the consumption of reagent by 1.5-2 times, theconsumption of energy by 2 times, reduces the working area by 10-15%, which results in high economic benefits. To get more information about wastewater treatment by the Magnetic Vortex you can visitour website